U-600P
MACHINE SPECIFICATIONS
| MODEL | Unit | U-600P | |
| TRAVEL | |||
| X axis travel | mm | 460 | |
| Y axis travel | mm | 620 | |
| Z axis travel | mm | 400 | |
| Rotary Axis Rotation Angle | degree | 0°~360° | |
| Tilting Axis Rotation Angle | degree | +110°~-90° | |
| Spindle nose to table surface Z axis | Vertical Spindles=0 | mm | 150-550 |
| Horizontal Spindles=180 | - | ||
| Table surface to floor | mm | 750±5 | |
| TABLE | |||
| Table dimensions | mm | Ø600 | |
| Table hole dimensions | mm | Ø60 H7 | |
| T slots | mm | 5x14 | |
| Min.table load | kg | 350 | |
| Working Torque | Rotary Axis | N-m | 672 |
| Tilting Axis | 2520 | ||
| Max.rotation speed | Rotary Axis | rpm | 25 |
| Tilting Axis | 25 | ||
| Max.diameter of workpiece | mm | Ø600x400(H) | |
| SPINDLE | |||
| Spindle speed | rpm | Direct-drive type 10000 | |
| Spindle taper | - | 7/24 Taper NO.40 | |
| Spindle power | Kw | 7.5/11 | |
| FEEDRATE | |||
| X-axis rapid traverse | m/min | 30 | |
| Y-axis rapid traverse | m/min | 30 | |
| Z-axis rapid traverse | m/min | 30 | |
| ATC | |||
| Tool changing time (Tool-to-Tool) | sec | 7/60Hz | |
| Tool changer | - | Arm type | |
| No.of Tools | - | 24 (30,40,60) | |
| Pull stud | - | P-40T (45°) | |
| Max.Tool weight | kg | 7 | |
| Max.Tool length | mm | 280 | |
| Max.Tool diameter | mm | ∮80 | |
| Max.Tool diameter (No adjacent tool) | mm | ∮150 | |
| FLOOR SPACE | mm | 3650(W)x3500(D) | |
| MACHINE WEIGHT | kg | 8850 | |
| MAX.MACHINE HEIGHT | mm | 3000 | |
| POWER CAPACITY | KVA | 40 | |
| AIR SOURCE | bar | 6~8 | |
Inquiry - U-600P
